High‑performance clamp classiX GSM
Product details
- Clamping force up to 11,000 N with a tightening torque of 40 Nm
- Special heat-resistant pressure plate, can be tilted by up to 35°
= Show Spareparts
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
|
GSM25
|
250 | 140 | 30x15 | 2.58 |
|
GSM30
|
300 | 140 | 30x15 | 3 |
|
GSM40
|
400 | 140 | 30x15 | 3.16 |
|
GSM50
|
500 | 140 | 30x15 | 3.4 |
|
GSM60
|
600 | 140 | 30x15 | 3.8 |
- Metal construction
- Locksmith work
- High-performance clamping
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Toggle made of steel, galvanised
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
- Clean the fluting on the rails with a steel brush.
- Clean and oil the pressure plate regularly.
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain).