High‑performance clamp SGTM, large throat depth
Product details
- Clamping force up to 8,500 N at tightening torque of 40 Nm
- Long life due to heat‐resistant pressure plate with sintered steel insert, which can be tilted up to 35°
- Opening 200 mm
= Show Spareparts
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
|
SG30T20M
|
300 | 200 | 30x15 | 3.39 |
|
SG60T20M
|
600 | 200 | 30x15 | 4.3 |
Signature 10
Point 1
Point 2
Point 3
Point 4
Point 5
- Metal construction
- Hall construction
- Locksmith work
- High-performance clamping
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in tempered, rolled steel, phosphated
- Toggle made of steel, galvanised
- Pressure plate made of steel, phosphated
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
- Clean and oil the spindle regularly.
- Clean and oil the pressure plate regularly.
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain).