High‑performance clamp SGM
Product details
- Clamping force up to 12,000 N at tightening torque of 40 Nm
- 20 % more clamping force per spindle rotation with optimised rail profile
- Maximum safety due to the better linear transfer of force of the sliding arm
- Long life due to heat‐resistant pressure plate with sintered steel insert, which can be tilted up to 35°
= Spare parts available
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
|
SG25M
|
250 | 140 | 34x13 | 2.58 |
|
SG30M
|
300 | 140 | 34x13 | 3.03 |
|
SG40M
|
400 | 140 | 34x13 | 3.16 |
|
SG50M
|
500 | 140 | 34x13 | 3.4 |
|
SG60M
|
600 | 140 | 34x13 | 3.8 |
|
SG80M
|
800 | 140 | 34x13 | 4.45 |
|
SG100M
|
1000 | 140 | 34x13 | 4.95 |
|
SG125M
|
1250 | 140 | 34x13 | 5.87 |
|
SG150M
|
1500 | 140 | 34x13 | 6.63 |
Maximum stability
The optimised profile shape guarantees greater clamping force build-up in the shortest time, while maintaining greater stability and safety. The fixed clamp forged from a single piece with moulded pressure plate is hardened, tempered and galvanised, making it highly durable and torsion-resistant.
Forged sliding arm
The sliding arm has a shape that allows for more efficient transfer of force. As a result of its more linear transfer of force, the U‐shaped sliding arm offers maximum security with the heaviest of loads. You can rely on that.
Special tilting pressure plate
The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. It has an extremely long service-life due to the oil-soaked sintered steel insert's excellent sliding and emergency running properties.
Tempered spindle
The tempered spindle is particularly sturdy and wear‐resistant. This considerably increases its durability.
- Metal construction
- Locksmith work
- High-performance clamping
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in tempered, rolled steel, phosphated
- Toggle made of steel, galvanised
- Pressure plate made of steel, phosphated
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
- Clean and oil the spindle regularly.
- Clean and oil the pressure plate regularly.
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain).