Malleable cast iron screw clamp TGRC with tried‐and‐true wooden handle
Product details
- Clamping force up to 5,500 N
- Ergonomically shaped wood handle
- With protective caps on the clamping surfaces
- Stable solid flat rail with serration
= Show Spareparts
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
|
TGRC10
|
100 | 50 | 15x5 | 0.26 |
|
TGRC15B5
|
150 | 50 | 15x5 | 0.29 |
|
TGRC20B5
|
200 | 50 | 15x5 | 0.31 |
|
TGRC12
|
120 | 60 | 20x5 | 0.42 |
|
TGRC20B6
|
200 | 60 | 20x5 | 0.49 |
|
TGRC30B6
|
300 | 60 | 20x5 | 0.56 |
|
TGRC16
|
160 | 80 | 25x6 | 0.73 |
|
TGRC20B8
|
200 | 80 | 25x6 | 0.77 |
|
TGRC25B8
|
250 | 80 | 25x6 | 0.82 |
|
TGRC30B8
|
300 | 80 | 25x6 | 0.87 |
|
TGRC20
|
200 | 100 | 27x7 | 1.19 |
|
TGRC25S10
|
250 | 100 | 27x7 | 1.28 |
|
TGRC30S10
|
300 | 100 | 27x7 | 1.33 |
|
TGRC40S10
|
400 | 100 | 27x7 | 1.43 |
|
TGRC25
|
250 | 120 | 29x9 | 1.54 |
|
TGRC30S12
|
300 | 120 | 29x9 | 1.63 |
|
TGRC40S12
|
400 | 120 | 29x9 | 1.8 |
|
TGRC50S12
|
500 | 120 | 29x9 | 2.05 |
|
TGRC60S12
|
600 | 120 | 29x9 | 2.24 |
|
TGRC80S12
|
800 | 120 | 29x9 | 2.62 |
|
TGRC100S12
|
1000 | 120 | 29x9 | 2.85 |
|
TGRC30
|
300 | 140 | 32x10 | 2.1 |
|
TGRC40S14
|
400 | 140 | 32x10 | 2.4 |
|
TGRC50S14
|
500 | 140 | 32x10 | 2.24 |
|
TGRC60S14
|
600 | 140 | 32x10 | 2.9 |
|
TGRC80S14
|
800 | 140 | 32x10 | 3.38 |
|
TGRC100S14
|
1000 | 140 | 32x10 | 3.78 |
|
TGRC150S14
|
1500 | 140 | 32x10 | 5.02 |
|
TGRC40
|
400 | 175 | 32x10 | 2.66 |
|
TGRC50S17
|
500 | 175 | 32x10 | 2.93 |
|
TGRC60S17
|
600 | 175 | 32x10 | 3.16 |
|
TGRC80S17
|
800 | 175 | 32x10 | 3.5 |
|
TGRC100S17
|
1000 | 175 | 32x10 | 4 |
- Furniture and joinery works
- Carpentry and woodwork
- Kitchen construction and shop fitting
- Shell construction
- Interior fittings
- DIY
- Powerful and rigid clamping
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Upper and lower section made of reinforced malleable cast iron, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Protective caps made of plastic
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
- Clean the fluting on the rails with a steel brush.
- Clean and oil the spindle regularly.
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only).
- Clean and oil the pressure plate regularly.
