Variable high‑performance clamps – Complete set SLV
Product details
- Clamping force up to 6,500 N
- Tipping is prevented through central positioning on the workpiece
- Special heat-resistant pressure plate, can be tilted by up to 35°
- Clamp can be fed through an opening in the workpiece/component
= Show Spareparts
| Order number | Opening | Throat depth | Spreading width | Rail | Weight |
| mm | mm | mm | mm | kg | |
|---|---|---|---|---|---|
|
SLV100M
|
1000 | 120 | 340-1250 | 27x13 | 4.71 |
|
SLV150M
|
1500 | 120 | 340-1750 | 27x13 | 5.9 |
|
SLV200M
|
2000 | 120 | 340-2250 | 27x13 | 6.5 |
End fastenings can be loosened without tools
The end fastenings on both sides can be loosened without tools enabling rapid changeover of the sliding arms for spreading tasks. It is also possible to replace the sliding arms or to add additional sliding arms easily.
Interchangeable sliding arms
The sliding arm is made from forged tempered steel and guarantees the highest level of safety through the linear transfer of forces and can withstand extremely large loads. These can be replaced by other sliding arm variants to suit the application and can also be supplemented by others.
Special tilting pressure plate
Both the SLV and the GSV have a special heat‐resistant pressure plate. This is replaceable and can be tilted up to 35°. Furthermore, the special pressure plates used with the GSV have a hardened and oil‐soaked sintered steel insert. This guarantees outstanding sliding and emergency running properties, thereby ensuring an extremely long service life.
Tempered spindle
The tempered spindle is particularly sturdy and wear‐resistant. This considerably increases its durability.
- Shell construction
- Metal construction
- Carpentry and woodwork
- Locksmith work
- New flexibility with large clamping widths
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly
