Telescopic drywall support STE with pump grip
Order number | Adjusting range | Load limit at min. extension length | Load limit at max. extension length | Weight |
mm | kg | kg | kg | |
---|---|---|---|---|
400-550 | 350 | 350 | 1.42 | |
575–910 | 350 | 350 | 1.8 | |
900-1500 | 350 | 210 | 2.29 | |
1450–2500 | 350 | 160 | 3.3 | |
1700–3000 | 350 | 110 | 3.8 | |
2070–3700 | 350 | 65 | 4.5 |
STE55 and STE90 are currently not GS-certified.
*By unscrewing the upper and lower TPU contact surface, the "adjustment range" can be increased by up to 100 mm.
Extremely secure hold
The support guarantees a reliable and secure hold:
- due to robust design ensures a max load of 350 kg can be applied (dependent upon the size of support and length applied)
- due to rubber TPU contact surfaces top and bottom (9 x 7 cm)
- due to anti-slip system integrated in the grip
Quick and accurate handling
The support can be precisely set to requirements, and safely released:
- due to fixing in three steps: In order to pre-set the telescopic drywall support press the release button and extend the telescopic inner tube to the desired length. Fine adjustment takes place by pressing the pump lever until the system plate of the support lies against the workpiece. Then turn the grip clockwise until the desired holding force is attained (observe the max. load-bearing capacity)
- due to releasing in two steps: First turn the telescopic drywall support anti-clockwise. As soon as no further holding force is present, press the release button to retract the inner tube.
- Carpentry and woodwork
- Kitchen construction and shop fitting
- Staircase construction
- Shell construction
- Interior fittings
- Dry construction
- DIY
- Fixes and supports during dry construction
- Single-worker assembly
- Read and follow the instruction manual.
- Steel tube, coated
- Handle made of 2-component plastic
- Lever made of reinforced PA6 plastic
- Contact surfaces of the pressure plates made of TPU plastic
- Check the product regularly, at least after ten uses, for damage and proper functioning of all moving parts.
- Do not use a damaged product.
- If the rotation function of the pressure plates is impaired, lubricate the thread of the threaded bolt with a commercially available lubricant.