Self-adjusting toggle clamps from BESSEY: Discover the difference

For use on welding tables with 16 mm and 28 mm hole diameters

The Toggle clamp adapter TWA-STC is suitable for direct use in the holes of the welding table. However, it can also be screwed onto the appropriate Extension TWX without a bolt. The round material can then be lowered into the table continuously using the adjusting ring. When combined in this way, the quick clamp adapter can also be positioned above the table on the workpiece.

For use on multifunctional tables with 20 mm hole diameter and worktop thicknesses of 19 to 25 mm (e.g. Festool MFT or Sortimo WorkMo)

The STC-SET-T20 adapter enables the use of BESSEY quick clamps on multifunction tables. The three-piece accessory set can be fitted in just a few simple steps. To do this, a plug-in pin is fastened beneath the base plate using a socket head screw. Once fitted, the quick clamp can be inserted directly into the multifunction table and securely fastened from below using a knurled nut.

The BESSEY Toggle Clamp Systainer STC-S-MFT makes day-to-day work much easier for tradespeople who often encounter varying conditions at different job sites. The systainer features a wooden insert integrated into the lid with a 20 mm hole, allowing it to function as a mobile workbench and providing practical options for securing a workpiece.

Contents:

• 4 x STC-HH50 horizontal toggle clamps with open arms and horizontal base plates
• 2 x push/pull clamps STC-IHH25
• 6 x STC-SET-T20 adapters
• 2 x All-steel table clamps with lever handles GTR12

All clamping tools in the Toggle Clamp Systainer can, of course, also be used on multifunction tables with a 20 mm hole diameter and a worktop thickness of at least 19 mm up to a maximum of 25 mm. Both Festool MFT and Sortimo WorkMo meet these requirements.