Horizontal fixture clamp WNS‑SET‑MFT
Product details
- Clamping force up to 750 N
- For using on multifunction tables such as Festool MFT and Sortimo WorkMo with hole diameter of 20 mm and plate thickness of min. 19 mm
- Quick fixing thanks to clamping levers on the side
- The particularly low height of the pressure piece (only 15 mm) enables full-surface processing of the workpiece - even with round and flat parts
- Patented pull-down mechanism prevents the workpiece from lifting from the table surface when clamping – even without fastening screws
- Bench dog BH-MFT can also be used as a universal limit stop for workpieces
= Show Spareparts
| Order number | Bolt | Opening | Content | Weight |
| mm | mm | kg | ||
|---|---|---|---|---|
|
WNS-SET-MFT
|
20 | 110 | 2 x horizontal fixture clamp / 2 x bench dog / 4 x knurled nut | 0.92 |
- Furniture and joinery works
- Interior fittings
- DIY
- For use on multifunctional tables
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Upper and lower section made of reinforced PA6 plastic
- Rail made of hardened steel, burnished
- Lever made of reinforced PA6 plastic
- Connecting elements made of steel, galvanised or burnished
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
- Clean in regular cycles, depending on the degree of soiling.
