Deep throat screw clamp TGNT with tommy bar
Product details
- Clamping force up to 7,000 N
- Heavy-duty design
- Tommy bar with rounded ends for simple transfer of force when clamping
- Large, stable solid plain rail with fluting
- Rail dimensions great than and equal to 40 x 11 are ungalvanized
= Show Spareparts
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
|
TGN30T20K
|
300 | 200 | 35x11 | 3 |
|
TGN40T20K
|
400 | 200 | 35x11 | 3.2 |
|
TGN40T25K
|
400 | 250 | 40x11 | 4.36 |
|
TGN60T25K
|
600 | 250 | 40x11 | 4.98 |
|
TGN80T25K
|
800 | 250 | 40x11 | 5.64 |
|
TGN40T30K
|
400 | 300 | 45x12 | 5.48 |
|
TGN60T30K
|
600 | 300 | 45x12 | 6.23 |
|
TGN80T30K
|
800 | 300 | 45x12 | 7.06 |
|
TGN40T40K
|
400 | 400 | 45x12 | 5.5 |
|
TGN60T40K
|
600 | 400 | 45x12 | 7.39 |
|
TGN80T40K
|
800 | 400 | 45x12 | 8.19 |
|
TGN30T50K
|
300 | 500 | 45x12 | 7.87 |
|
TGN60T50K
|
600 | 500 | 45x12 | 9.1 |
|
TGN80T50K
|
800 | 500 | 45x12 | 9.91 |
- Furniture and joinery works
- Carpentry and woodwork
- Kitchen construction and shop fitting
- Shell construction
- Interior fittings
- Powerful and rigid clamping
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Upper and lower section made of reinforced malleable cast iron, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Toggle made of steel, galvanised
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
- Clean the fluting on the rails with a steel brush.
- Clean and oil the spindle regularly.
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only).
- Clean and oil the pressure plate regularly.
