All‑steel table clamp GTR
Product details
- Specially forged fixed arm for 12 x 8 mm grooves
- For secure fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi/Hikoki, etc. and for clamping in profiles as well as work tables
- Clamping force up to 1,800 N
- Ergonomically shaped wooden handle
- GTR12SET:
= Show Spareparts
| Order number | Opening | Throat depth | Rail | Content | Weight |
| mm | mm | mm | kg | ||
|---|---|---|---|---|---|
|
GTR12
|
120 | 60 | 13,5x6,5 | – | 0.3 |
|
GTR12SET
|
120 | 60 | 13,5x6,5 | 2 x GTR12 | 0.61 |
|
GTR16B6
|
160 | 60 | 13,5x6,5 | – | 0.32 |
|
GTR30B6
|
300 | 60 | 13,5x6,5 | – | 0.4 |
- Furniture and joinery works
- Kitchen construction and shop fitting
- Interior fittings
- DIY
- Secure guide rails and clamp in profiles
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
- Clean and oil the spindle regularly.
- Clean and oil the pressure plate regularly.
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain).