Punch snips
= Show Spareparts
| Order number | Overall length | Overall length | Blade length | Blade length | Sheet thickness (600 N/mm²) | Product life expectancy | Weight |
| mm | " | mm | " | mm | kg | ||
|---|---|---|---|---|---|---|---|
|
D207-250
|
250 | 10 | 42 | 1 5/8 | 1 | ++ | 0.49 |
|
D207-250L
|
250 | 10 | 42 | 1 5/8 | 1 | ++ | 0.49 |
|
D207-275
|
275 | 11 | 42 | 1 5/8 | 1 | ++ | 0.53 |
|
D207-275L
|
275 | 11 | 42 | 1 5/8 | 1 | ++ | 0.53 |
|
D207-300
|
300 | 12 | 47 | 1 7/8 | 1 | ++ | 0.58 |
|
D207-300L
|
300 | 12 | 47 | 1 7/8 | 1 | ++ | 0.58 |
|
D107-250
|
250 | 10 | 42 | 1 5/8 | 1 | + | 0.49 |
|
D107-250L
|
250 | 10 | 42 | 1 5/8 | 1 | + | 0.49 |
|
D107-250-SB
|
250 | 10 | 42 | 1 5/8 | 1 | + | 0.5 |
|
D107-250L-SB
|
250 | 10 | 42 | 1 5/8 | 1 | + | 0.5 |
|
D107-275
|
275 | 11 | 42 | 1 5/8 | 1 | + | 0.55 |
|
D107-275L
|
275 | 11 | 42 | 1 5/8 | 1 | + | 0.55 |
|
D107-300
|
300 | 12 | 47 | 1 7/8 | 1 | + | 0.6 |
|
D107-300L
|
300 | 12 | 47 | 1 7/8 | 1 | + | 0.6 |
- Metal construction
- Plumbing
- The stable all-rounder
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts
- Sheet metal snips must only be used to cut thin sheets of non-hardened steel.
- The cutting tool may only be used by hand without any additional aids.
- The cutting tool must be ground regularly and professionally. Dull cutting tools increase the risk of injury.
- Shears parts made of forged steel, coated handle ends
- Connecting elements made of steel, galvanised
- Clean the rails with solvent.
- Rub the cutting edge with a lightly oiled cloth (remove material dust) in regular cycles, depending on the degree of soiling.
- Regularly oil the screw connections on the inside of the blade.
- Rusty or scratched cutting edge, gently scrape it off with an oil stone.
- If the snips exhibit too much play, adjust the screw iIt must still be possible to open and close the shears easily).